/ Test assembler program
/ To run:
/ File/Open this file
/ Ensure all 8 address/data switches are 0 (up)
/ Press LOAD ADDR
/ Press RUN
/ It will increment the AC register (slowly)
/ until it reaches 0 again, then stop
/ It can also be stopped at any time by
/ pressing HALT and restarted with RUN
START, CLA	/ Clear AC
INCR, IAC		/ Increment AC
BACK, NOP	/ Delay
NOP		/ Delay
ISZ INDX		/ Inc INDX
JMP BACK	/ ... and go to BACK if non-0
ISZ INDY		/ Inc INDY
JMP INCR		/ ... and go to INCR if non-0
HLT		/ Stop
INDX, 000		/ Counter, initialised to 0
INDY, 000	/ Counter, initialised to 0
